View E3F2-LS10C4-P1_7249972.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

photoelectric sensors e3f2 1 photoelectric sensors e3f2 threaded cylindrical photoelectric sensors with built-in amplifier for use as an optical proximity switch ? m18 din-sized cylindrical housing housing materials: plastic, nickel plated brass and stainless steel axial and radial types (with integrated 90-optics) enclosure rating ip67 dc switching types with connectors for easy maintenance full metal plug-in type sensing distance separate types: 7 m, 10 m retroreflective polarizing types: 2 m, 4 m background suppression type: 10 cm long detection distance (0.3 m, 1 m) with sensitivity adjust- er for diffuse type wide-beam characteristics (10 cm) for diffuse type wide operating voltage range (10 to 30 vdc or 24 to 240 vac) short-circuit and reverse connection protection (dc switching type) ul and csa approved (ac switching types) ul listed (dc switching types)
2 photoelectric sensors e3f2 ordering information dc-switching models housing material: plastic note: shaded models are normally stocked. note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by a dding the length of the cable (e.g. e3f2-r2rb4 2m or e3f2-r2rb4 5m). for other cable length please contact your omron sales representativ e. sensing method appearance connection method sensing distance model pnp output npn output through-beam multi purpose axial pre-wired 7 m e3f2-7b4 e3f2-7c4 m12 connector e3f2-7b4-p1 e3f2-7c4-p1 - precision detection (*1) - test input pre-wired 10 m e3f2-10b4 e3f2-10c4 m12 connector e3f2-10b4-p1 e3f2-10c4-p1 retro- reflective (incl. reflector e39-r1 or e39-r1s) non-polarizing (without msr function) axial pre-wired 0.1 - 2 m (*2) e3f2-r2b4 e3f2-r2c4 m12 connector e3f2-r2b4-p1 e3f2-r2c4-p1 polarizing (with msr function) fixed sensitivity pre-wired 0.1 - 4 m (*3) e3f2-r4b4f e3f2-r4c4f m12 connector e3f2-r4b4f-p1 e3f2-r4c4f-p1 adjustable sensitivity pre-wired e3f2-r4b4 e3f2-r4c4 m12 connector e3f2-r4b4-p1 e3f2-r4c4-p1 polarizing (with msr function) radial pre-wired 0.1 - 2 m (*2) e3f2-r2rb41 e3f2-r2rc41 m12 connector e3f2-r2rb41-p1 e3f2-r2rc41-p1 diffuse reflective fixed sensitivity wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10b4-n e3f2-ds10c4-n m12 connector e3f2-ds10b4-p1 e3f2-ds10c4-p1 adjustable sensitivity pre-wired 0.3 m e3f2-ds30b4 e3f2-ds30c4 m12 connector e3f2-ds30b4-p1 e3f2-ds30c4-p1 pre-wired 1 m e3f2-d1b4 e3f2-d1c4 m12 connector e3f2-d1b4-p1 e3f2-d1c4-p1 adjustable sensitivity radial pre-wired 0.3 m e3f2-ds30b41 e3f2-ds30c41 m12 connector e3f2-ds30b41-p1 e3f2-ds30c41-p1 background suppression fixed sensing distance axial pre-wired 10 cm e3f2-ls10b4 e3f2-ls10c4 m12 connector e3f2-ls10b4-p1 E3F2-LS10C4-P1 *1) with slit e39-es18 *2) with reflector e39-r1 *3) with reflector e39-r1s
photoelectric sensors e3f2 3 housing material: metal (nickel plated brass) note: shaded models are normally stocked. note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by a dding the length of the cable (e.g. e3f2-r2rb4 2m or e3f2-r2rb4 5m). for other cable length please contact your omron sales representativ e. sensing method appearance connection method sensing distance model pnp output npn output through-beam multi purpose axial pre-wired 7 m e3f2-7b4-m e3f2-7c4-m m12 connector e3f2-7b4-m1-m e3f2-7c4-m1-m - precision detection - test input pre-wired 10 m e3f2-10b4-m e3f2-10c4-m m12 connector e3f2-10b4-m 1-m e3f2-10c4-m 1-m retro- reflective (incl. reflector e39-r1) polarizing (with msr function) fixed sensitivity axial pre-wired 0.1 - 2 m (*1) *1) with reflector e39-r1 e3f2-r2rb4-m e3f2-r2rc4-m m12 connector e3f2-r2rb4-m1-m e3f2-r2rc4-m1-m pre-wired 0.1 - 4 m (*2) *2) with reflector e39-r1s e3f2-r4b4f-m e3f2-r4c4f-m m12 connector e3f2-r4b4f-m1-m e3f2-r4c4f-m1-m adjustable sensitivity pre-wired e3f2-r4b4-m e3f2-r4c4-m m12 connector e3f2-r4b4-m1-m e3f2-r4c4-m1-m polarizing (with msr function) radial pre-wired 0.1 - 2 m (*1) e3f2-r2rb41-m e3f2-r2rc41-m diffuse reflective fixed sensing distance wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10b4-m e3f2-ds10c4-m m12 connector e3f2-ds10b4-m1-m e3f2-ds10c4-m1-m adjustable sensing distance pre-wired 0.3 m e3f2-ds30b4-m e3f2-ds30c4-m m12 connector e3f2-ds30b4-m1-m e3f2-ds30c4-m1-m pre-wired 1 m e3f2-d1b4-m e3f2-d1c4-m m12 connector e3f2-d1b4-m1-m e3f2-d1c4-m1-m adjustable sensing distance radial pre-wired 0.3 m e3f2-ds30b41-m e3f2-ds30c41-m m12 connector e3f2-ds30b41-m1-m e3f2-ds30c41-m1-m background suppression fixed sensing distance axial pre-wired 10 cm e3f2-ls10b4-m e3f2-ls10c4-m m12 connector e3f2-ls10b4-m1-m e3f2-ls10c4-m1-m
4 photoelectric sensors e3f2 housing material: metal (stainless steel) note: shaded models are normally stocked. note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by a dding the length of the cable (e.g. e3f2-r2rb4-s 2m or e3f2-r2rb4-s 5m). for other cable length please contact your omron sales represent a- tive. ac-switching models housing material: plastic note: shaded models are normally stocked. note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by a dding the length of the cable (e.g. e3f2-r2z1 2m or e3f2-r2z1 5m). for other cable length please contact your omron sales representative. sensing method appearance connection method sensing distance model pnp output npn output through-beam axial pre-wired 7 m e3f2-7b4-s e3f2-7c4-s m12 connector e3f2-7b4-m1-s e3f2-7c4-m1-s retro- reflective (incl. reflector e39-r1) polarizing (with msr function) axial pre-wired 0.1 - 2 m (with reflector e39-r1) e3f2-r2rb4-s e3f2-r2rc4-s m12 connector e3f2-r2rb4-m1-s e3f2-r2rc4-m1-s diffuse reflective fixed sensitivity wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10b4-s e3f2-ds10c4-s m12 connector e3f2-ds10b4-m1-s e3f2-ds10c4-m1-s adjustable sensitivity pre-wired 0.3 m e3f2-ds30b4-s e3f2-ds30c4-s m12 connector e3f2-ds30b4-m1-s e3f2-ds30c4-m1-s sensing method appearance connection method sensing distance model light-on dark-on through-beam pre-wired 3 m e3f2-3z1 e3f2-3z2 axial retro- reflective (incl. reflector e39-r1) non-polarizing (without msr function) axial pre-wired 0.1 - 2 m (with reflector e39-r1) e3f2-r2z1 e3f2-r2z2 diffuse reflective fixed sensing distance wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10z1-n e3f2-ds10z2-n
photoelectric sensors e3f2 5 accessories (order separately) note: shaded models are normally stocked. for detailed information about accessories, refer to the main chapter ?accessories? at the end of the document. note: 1. typical sensing distance corresponds to 80% of the max. sensing distance. for details, please refer to ?engineering data?. sensor i/o connectors note: shaded models are normally stocked. name sensing distance (typical) [1.] model remark reflectors 0.1 - 3.7 m (axial) 0.1 - 2.4 m (radial) e39-r1 60 x 40 mm (included in some models) 0.1 - 4.3 m (axial) e39-r1s for e3f2-r4 0.1 - 4.2 m (axial) 0.1 - 2.7 m (radial) e39-r7 84 mm 0.1 - 5.3 m (axial) 0.1 - 3.1 m (radial) e39-r8 100 x 100 mm 0.1 - 4.3 m (axial) e39-r40 80 x 80 mm tape reflectors e39-rsa 35 x 10 mm e39-rsb 35 x 40 mm e39-rs3 80 x 70 mm lens cap e39-f31 mounting bracket y92e-b18 screw mount y92e-g18 quick access mounting slit e39-es18 for e3f2-10 @ - precision detection cord shape cable type model standard straight 2 m four-wire type xs2f-d421-d80-a 5 m xs2f-d421-g80-a l-shaped 2 m xs2f-d422-d80-a 5 m xs2f-d422-g80-a vibration-proof robot cable straight 2 m xs2f-d421-d80-r 5 m xs2f-d421-g80-r l-shaped 2 m xs2f-d422-d80-r 5 m xs2f-d422-g80-r
6 photoelectric sensors e3f2 specifications ratings / characteristics of dc switching models note: 1. for stable sensing distance in detail, please refer to ?engineering data? 2. typical sensing distance corresponds to 80% of the max. sensing distance. 3. the enclosure rating ip67 of omron internal standards correspond to stricter test requirements than the standard iec 60529 (ref er to chapter ?precautions?) 4. for other cable materials (e.g. pur) please contact your omron sales representative. 5. material-specification for stainless steel housing case: 1.4305 (w.-no.), 303 (aisi), 2346 (ss). for other stainless steel mate rials please contact your omron sales representative. 6. with slit e39-es18 7. pnp models -b4: v cc to v cc -2.5 v: emitting off (source current: 3 ma max.) / open or 0 to 2.5 v: emitting on (leakage current: 0.1 ma max.) npn models -c4: 0 to 2.5 v: emitting off (source current: 3 ma max.) / open or vcc to vcc -2.5 v: emitting on (leakage current: 0.1 ma max.) item e3f2-7 @ e3f2-10 @ e3f2-r2 @ 4- @ e3f2-r2r @ e3f2-r4 @ - @ e3f2-ds10 @ e3f2-ds30 @ e3f2- d1 @ 4- @ e3f2- ls10 @ 4- @ sensing method through-beam retroreflective diffuse reflective - multi purpose - precision detection [6.] - test input non- polarizing polarizing wide beam characteristic adjustable sensing distance background suppression power supply voltage 10 to 30 v dc 12 to 24 v dc 10 to 30 v dc current consumption 50 ma max. 25 ma max. 30 ma max. 25 ma max. 30 ma max. rated sensing distance [1.] 7 m 10 m 0.1 - 2 m (with reflector e39-r1) 0.1 - 4 m (with reflector e39-r1s) 0.1 m (5 x 5 cm white mat paper) 0.3 m (10 x 10 cm white mat paper) 1 m (30 x 30 cm white mat paper) 0.1 m (10 x 10 cm white mat paper) typical sensing distance for different reflector types (ref. to accesso- ries) [2.] ? e39-r1: 4.0 m e39-r7: 4.5 m e39-r8: 5.3 m e39-r1: axial 3.7 m radial 2.4 m e39-r7: axial 4.2 m radial 2.7 m e39-r8: axial 5.3 m radial 3.1 m e39-r1s:4.3 m e39-r7: 4.8 m e39-r8: 5.6 m e39-r40: 4.3 m e39-rs3: 2 m ? standard object opaque: 11 mm dia. min. opaque: 56 mm dia. min. ? directional angle 3 to 20 ? differential travel (hysteresis) ? 20% max. 5% max black/white error ? 3% response time operation and reset: 2.5 ms max. 1 ms max 2.5 ms max. 1 ms max. control output transistor (open collector), load current: 100 ma max. (residual voltage: 2 v max.) power reset time 50 ms 100 ms max. 50 ms 100 ms ambient illumination incandescent lamp: 3000 lx max. / sunlight: 10000 lx max. ambient temperature operating: -25 to 55 c / storage: -30 to 70 c (with no icing or condensation) ambient humidity operating: 35% to 85% / storage: 35% to 95% (without condensation) insulation resistance 20 m ? min. at 500 v dc between energized parts and case dielectric strength 1000 vac max., 50 / 60 hz for 1 min between energized parts and case vibration resistance 10 to 55 hz, 1.5 mm double amplitude for 2 hrs each direction (x, y, z) shock resistance destruction: 500 m/s 2 each direction (x, y, z) enclosure ratings ip67 [3.]; nema 1, 2, 4 light source infrared led (880 nm/850 nm) red led (660 nm) infrared led (880 nm) red led (660 nm) indicators light incident / power indi- cator for light source (red) output (orange) / light emission (red) light incident / power indicator for light source (red) light incident (red) / stability (green) light incident / power indicator for light source (red) light incident (red) / stability (green) output indicator (orange) / sta- bility (green) sensitivity adjustment fixed fixed / adjustable fixed adjustable fixed connection method 2 m, 5 m pre-wired cable (pvc, dia. 4 mm (18 / 0.12) [4.]) or m12-connector test input ? [7.] ? operation mode light-on or dark-on selectable by wiring weight (approx.) plastic case pre-wired (2 m) 120 g 60 g connector 40 g 20 g metal case pre-wired (2 m) 180 g 90 g connector 120 g 50 g circuit protection output short-circuit and power supply reverse polarity housing materials plastic (case: abs; lens: pmma) nickel brass nickel brass ? nickel brass nickel brass nickel brass nickel brass nickel brass nickel brass stainless steel [5.] ? ? stainless steel [5.] ?stainless steel [5.] stainless steel [5.] ??
photoelectric sensors e3f2 7 ratings / characteristics of ac switching models note: 1. for stable sensing distance in detail, please refer to ?engineering data? 2. typical sensing distance corresponds to 80% of the max. sensing distance. 3. the enclosure rating ip67 of omron internal standards correspond to stricter test requirements than the standard iec 60529 (ref er to chapter ?precautions?) item e3f2-3z1 e3f2-3z2 e3f2-r2z1 e3f2-r2z2 e3f2-ds10z1 e3f2-ds10z2 sensing method through-beam non-polarizing retroreflective diffuse reflective (wide-beam characteristic) power supply voltage 24 to 240 vac 10%, 50 / 60 hz current consumption 10 ma max. 5 ma max. rated sensing distance[1.] 3 m 0.1 - 2 m (with reflector e39-r1) 0.1 m (5 x 5 cm white mat paper) typical sensing distance for dif- ferent reflector types [2.] ? e39-r1: 3,4 m e39-r7: 3,9 m e39-r8: 5,2 m ? detectable object opaque object: 11 mm min. opaque object: 56 mm min. opaque objects directional angle 3 to 20 ? differential travel ? 20% max. response time 30 ms max. control output ac solid state (scr) 200 ma max.; residual voltage: 5 v max. at 200 ma power reset time 100 ms ambient illumination incandescent lamp: 3000 lx max. sunlight: 10000 lx max. ambient temperature operating: -25 to 55 c / storage: -30 to 70 c (with no icing or condensation) ambient humidity operating: 35% to 85% / storage: 35% to 95% (without condensation) insulation resistance 20 m ? min. at 500 v dc between energized parts and case dielectric strength 1500 vac, 50 / 60 hz for 1 min between energized parts and case vibration resistance 10 to 55 hz, 1.5 mm double amplitude for 2 hrs each direction (x, y, z) shock resistance 500 m/sqr (approx. 50 g) for each direction (x, y, z) enclosure rating ip67 [3.]; nema 1, 2, 4 light source infrared led (880 nm) indicators light incident/power indicator for light source (red) sensitivity adjustment fixed connection method 2 m, 5 m pre-wired cable (pvc dia. 4 mm (14 / 0.15)) operation mode light-on or dark-on (fixed) circuit protection none weight (approx.) 110 g (pre-wired 2 m cable) housing materials plastic (case: abs; lens: pmma)
8 photoelectric sensors e3f2 engineering data (typical) operating range (typical) through-beam models (axial) e3f2-7 @ 4- @ through-beam models (axial) e3f2-3z @ through-beam models (axial) e3f2-10 @ retroreflective models (axial) e3f2-r2 @ 4- @ (non polarizing) and reflectors retroreflective models (axial) e3f2-r2z @ (non polarizing) and reflectors retroreflective models (axial) e3f2-r2r @ 4- @ (polarizing) and reflectors retro-reflective models (axial) e3f2-r4 @ 4 @ - @ (polarizing) retroreflective models (radial) e3f2-r2r @ 41- @ (polarizing) and reflectors 12345 0 0 100 200 300 ?100 ?200 ?300 distance y (mm) distance x (m) typical sensing distance: 3.8 m x y -500 -400 -300 -200 -100 0 100 200 300 400 500 0 1 2 3 4 5 6 7 8 9 10 11 1213 1415 16 17 distance x (m) distance y (mm) x y 123456 0 0 100 200 300 ?100 ?200 ?300 distance y (mm) distance x (m) 8 7 typical sensing distances: e39-r1: 4.0 m e39-r7: 4.5 m e39-r8: 5.3 m x y reflector 123456 0 0 100 200 300 ?100 ?200 ?300 distance y (mm) distance x (m) 8 7 typical sensing distances: e39-r1: 3.4 m e39-r7: 3.9 m e39-r8: 5.2 m x y reflector 12 34 56 0 0 50 100 150 200 ?50 ?100 ?150 ?200 distance y (mm) distance x (m) x y reflector 7 typical sensing distances: e39-r1: 3.7 m e39-r7: 4.2 m e39-r8: 5.3 m 0 01 23456 789 distance x (m) - 250 - 200 - 150 - 100 -50 50 100 150 200 250 distance y (mm) x y reflector typical sensing distance e39-rs3 e39-r1s e39-r40 e39-r7 e39-r8 0.5 1 1.5 2 2.5 3 0 0 50 100 ?50 ?100 distance y (mm) distance x (m) 4 3.5 typical sensing distances: e39-r1: 2.4 m e39-r7: 2.7 m e39-r8: 3.1 m x y reflector
photoelectric sensors e3f2 9 excess gain ratio vs. distance (typical) diffuse reflective models (axial) e3f2-ds10 @ 4- @ (wide-beam type) diffuse reflective models (axial) e3f2-ds10z- @ (wide-beam type) diffuse reflective models (axial) e3f2-ds30 @ 4- @ diffuse reflective models (radial) e3f2-ds30 @ 41- @ diffuse reflective models (axial) e3f2-d1 @ 4- @ through-beam models (axial) e3f2-7 @ 4- @ through-beam models (axial) e3f2-3z @ through-beam models (axial) e3f2-10 @ 20 40 60 80 100 120 0 0 5 10 15 ?5 ?10 ?15 distance y (mm) distance x (mm) 140 white paper (50 x 50 mm) x y object 20 40 60 80 100 120 0 0 10 20 30 ?10 ?20 ?30 distance y (mm) distance x (mm) 140 white paper (50 x 50 mm) x y object 100 200 300 400 500 600 0 0 10 20 30 40 ?10 ?20 ?30 ?40 distance y (mm) distance x (mm) sensing distance adjustable between 0 and 550 mm sensitivity adjusted to maximum sensitivity adjusted to 400 mm white paper (100 x 100 mm) x y object 100 200 300 400 500 0 0 10 20 30 40 ?10 ?20 ?30 ?40 distance y (mm) distance x (mm) sensitivity adjusted to 390 mm white paper (90% reflectivity) sensing object: 100 x 100 mm x y object 100 80 60 40 20 0 -20 -40 -60 -80 -100 0 200 400 600 800 1000 1200 1400 1600 distance x (mm) distance y (mm) sensing object: 300 x 300 mm x y object 2 4 6 8 10 12 0 100 10 1 0.1 excess gain distance x (m) 1 2345 6 0 100 10 1 0.1 excess gain distance x (m) 7 1 10 100 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 distance [m] relative gain
10 photoelectric sensors e3f2 retroreflective models (axial) e3f2-r2 @ 4- @ (non polarizing) and reflectors retroreflective models (axial) e3f2-r2z @ (non polarizing) and reflectors retroreflective models (axial) e3f2-r2r @ 4- @ (polarizing) and reflectors retroreflective models (axial) e3f2-r4 @ 4 @ - @ retroreflective models (radial) e3f2-r2r @ 41- @ (polarizing) and reflectors diffuse reflective models (axial) e3f2-ds10 @ 4- @ (wide-beam type) diffuse reflective models (axial) e3f2-ds10z- @ (wide-beam type) diffuse reflective models (axial) e3f2-ds30 @ 4- @ 123456 0 100 10 1 0.1 excess gain distance x (m) 7 8 reflector e39-r7 reflector e39-r1 reflector e39-r8 1 2345 6 0 100 10 1 0.1 excess gain distance x (m) 7 reflector e39-r1 reflector e39-r7 reflector e39-r8 1 2345 6 0 100 10 1 0.1 excess gain distance x (m) 7 reflector e39-r1 reflector e39-r7 reflector e39-r8 0.1 1 10 100 02 4 6 810 distance x (m) excess gain reflectors: e39-rs3 e39-r1s e39-r40 e39-r7 e39-r8 12345 0 100 10 1 0.1 excess gain distance x (m) reflector e39-r1 reflector e39-r7 reflector e39-r8 20 40 60 80 100 120 0 100 10 1 0.1 excess gain distance x (mm) 140 grey paper (18% reflectivity) sensing object: 50 x 50 mm white paper (90% reflectivity) 50 100 150 0 100 10 1 0.1 excess gain distance x (mm) 200 grey paper (18% reflectivity) sensing object: 50 x 50 mm white paper (90% reflectivity) 200 400 600 800 1000 0 100 10 1 0.1 excess gain distance x (mm) grey paper (18% reflectivity) white paper (90% reflectivity) sensitivity adjusted to maximum sensing object: 100 x 100 mm
photoelectric sensors e3f2 11 diffuse reflective models (radial) e3f2-ds30 @ 41- @ diffuse reflective models (axial) e3f2-d1 @ 4- @ light spot vs. sensing distance incline (left and right) incline (up and down) background suppression models e3f2-ls @ background suppression models e3f2-ls @ background suppression models e3f2-ls @ object material vs. sensing distance background suppression models e3f2-ls @ 100 200 300 400 500 0 100 10 1 0.1 excess gain distance x (mm) grey paper (18% reflectivity) sensing object: 100 x 100 mm white paper (90% reflectivity) sensitivity adjusted to 390 mm 0,1 1 10 100 distance(m) excess gain 0 0.5 1 1.5 2 0 2 4 6 050100150 distance(mm) spot diameter(mm) -20,00% -10,00% 0,00% 10,00% 20,00% -40 -30 -20 -10 0 10 20 30 40 incline angle (?) sensing distence movement (%) -20,00% -10,00% 0,00% 10,00% 20,00% -40 -30 -20 -10 0 10 20 30 40 incline angle (?) sensing distence movement (%) 0,0 20,0 40,0 60,0 80,0 100,0 120,0 white corrugated paper black sus mirror sensing distance(mm)
12 photoelectric sensors e3f2 operation output circuits structure of sensor i/o connector pnp output classification wire color connector pin no. use dc brown power supply (+v) white mode selection lon/don blue power supply (0 v) black output 1 2 3 4 1 2 3 4 brown white blue black xs2f-d42 # -d80- # xs2f-g42 # -g80- # model output transistor status timing chart connection method output circuit e3f2- @ b4- @ (except for e3f2-10b4- @ and e3f2-ls10b4- @ ) ? ? ? through-beam emitter on when light is incident. (light-on) connect the pink (pin ) and brown (pin ) cords or open the pink cord (pin ). on when light is interrupted. (dark- on) connect the pink (pin ) and blue (pin ) cords. main circuit 1 2 3 4 1 3 connector pin arrangement 10 to 30 vdc 0 v brown blue power indicator (red) incident interrupted on off on off operate release output indicator (red) output transistor load (relay) 2 1 2 light indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d z d : v z = 36 v stability indicator* green * only on models e3f2-r4b4- @ and e3f2-d1b4- @ incident interrupted on off on off operate release output indicator (red) output transistor load (relay) 2 3 light indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green * only on models e3f2-r4b4- @ and e3f2-d1b4- @
photoelectric sensors e3f2 13 note: terminal numbers for connector type. e3f2-10b4- @ ? ? through-beam emitter on when light is incident. (light-on) connect the pink (pin ) and brown (pin ) cords or open the pink cord (pin ). on when light is interrupted. (dark- on) connect the pink (pin ) and blue (pin ) cords. e3f2-ls10b4- @ on when light is incident. (light-on) connect the pink (pin ) and brown (pin ) cords or open the pink cord (pin ). on when light is interrupted. (dark- on) connect the pink (pin ) and blue (pin ) cords. model output transistor status timing chart connection method output circuit on off on off on off te s t input light emission indicator red incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) 2 1 2 output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v z d incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) 2 3 output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) 2 1 2 output indicator stability indicator* orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d z d : v z = 36 v green incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) 2 3 output indicator stability indicator* orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v green
14 photoelectric sensors e3f2 npn output model output transistor status timing chart connection method output circuit e3f2- @ c4- @ (except for e3f2-10c4- @ and e3f2-ls10c4- @ ) ? ? through-beam emitter on when light is incident. (light-on) connect the pink (pin ) and brown (pin ) cords or open the pink cord (pin ). on when light is interrupted. (dark- on) connect the pink (pin ) and blue (pin ) cords. e3f2-10c4- @ ? ? through-beam emitter on when light is incident. (light-on) connect the pink (pin ) and brown (pin ) cords or open the pink cord (pin ). on when light is interrupted. (dark- on) connect the pink (pin ) and blue (pin ) cords. main circuit 1 2 3 4 1 3 connector pin arrangement 10 to 30 vdc 0 v brown blue power indicator (red) incident interrupted on off on off operate release output indicator (red) output transistor load (relay) 2 1 2 output indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green * only on models e3f2-r4c4- @ and e3f2-d1c4- @ incident interrupted on off on off operate release output indicator (red) output transistor load (relay) 2 3 output indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green * only on models e3f2-r4c4- @ and e3f2-d1c4- @ on off on off on off te s t input light emission indicator red incident interrupted on off on off operate release output indicator (red) output transistor load (relay) 2 1 2 light indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) 2 3 light indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v
photoelectric sensors e3f2 15 note: terminal numbers for connector type. ac output e3f2-ls10c4- @ on when light is incident. (light-on) connect the pink (pin ) and brown (pin ) cords or open the pink cord (pin ). on when light is interrupted. (dark- on) connect the pink (pin ) and blue (pin ) cords. model output transistor status timing chart connection method output circuit incident interrupted on off on off operate release output indicator (red) output transistor load (relay) 2 1 2 output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) 2 3 output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green model output transistor status timing chart connection method output circuit e3f2-3lz ? ? ? through-beam emitter e3f2-3z1 e3f2-r2z1 e3f2-ds10z1-n on when light is incident. (light-on) ? e3f2-3z2 e3f2-r2z2 e3f2-ds10z2-n on when light is interrupted. (dark- on) ? main circuit 24 to 240 vac brown blue power indicator (red) incident interrupted on off on off operate release output indicator (red) output transistor load (relay) light indicator red main circuit 200 ma max. load brown black blue 24 to 240 vac incident interrupted on off on off operate release output indicator (red) output transistor load (relay)
16 photoelectric sensors e3f2 dimensions note: all units are in millimeters unless otherwise indicated dc-switching models, plastic, axial type cable type connector type without potentiometer e3f2-7 @ e3f2-10 @ e3f2-r2 @ 4 e3f2-ds10 @ 4-n e3f2-ls10 @ 4 e3f2-r4 @ 4f e3f2-7 @ -p1 e3f2-10 @ ?p1 e3f2-r2 @ 4-p1 e3f2-ds10 @ 4-p1 e3f2-ls10 @ 4-p1 e3f2-r4 @ 4f-p1 with potentiometer e3f2-ds30 @ 4 e3f2-d1 @ 4 e3f2-ds30 @ 4-p1 e3f2-d1 @ 4-p1 4.8 dia 37 42.3 64.9 m18x1 6g light indicator 5 4 8 16.4 dia 6.2 22 24 4 dia optical area 5 4 8 m18x1 6g light indicator 4.7 dia 42.3 37 m12x1 6g 16.6 dia 73 6.2 22 24 62 optical area 37 42.3 49.3 m18x1 6g light indicator sensitivity adjustor 5 4 8 16.4 dia 4.8 dia 6.2 22 24 64.9 4 dia optical area 5 4 8 m18x1 6g sensitivity adjustor light indicator 4.7 dia 49.3 42.3 37 m12x1 6g 16.6 dia 73 6.2 22 24 62 optical area
photoelectric sensors e3f2 17 dc-switching models, plastic, radial type cable type connector type without potentiometer e3f2-r2r @ 41 e3f2-r2r @ 41-p1 with potentiometer e3f2-ds30 @ 41 e3f2-ds30 @ 41-p1 37 42.3 64.9 m18x1 6g light indicator 5 4 8 16.4 dia 4.8 dia 4 dia 6.9 3.45 24 22 optical area 13.2 5 4 8 m18x1 6g light indicator 4.7 dia 42.3 37 m12x1 6g 16.6 dia 73 62 6.9 optical area 24 13.2 22 3.45 37 42.3 49.3 m18x1 6g light indicator sensitivity adjustor 5 4 8 16.4 dia 4.8 dia 64.9 4 dia 6.9 optical area 24 22 3.45 13.2 5 4 8 m18x1 6g sensitivity adjustor light indicator 4.7 dia 49.3 42.3 37 m12x1 6g 16.6 dia 73 62 6.9 optical area 24 13.2 3.45 22
18 photoelectric sensors e3f2 dc-switching models, metal (brass and stainless steel), axial type cable type connector type without potentiometer e3f2-7 @ -m e3f2-7 @ -s e3f2-10 @ -m e3f2-r2r @ 4-m e3f2-r2r @ 4-s e3f2-ds10 @ 4-m e3f2-ds10 @ 4-s e3f2-ls10 @ 4-m e3f2-r4 @ 4f-m e3f2-7 @ -m1-m e3f2-7 @ -m1-s e3f2-10 @ -m1-m e3f2-r2r @ 4-m1-m e3f2-r2r @ 4-m1-s e3f2-ds10 @ 4-m1-m e3f2-ds10 @ 4-m1-s e3f2-ls10 @ 4-m1-m e3f2-r4 @ 4f-m1-m with potentiometer e3f2-ds30 @ 4-m e3f2-ds30 @ 4-s e3f2-r4 @ 4-m e3f2-d1 @ 4-m e3f2-ds30 @ 4-m1-m e3f2-ds30 @ 4-m1-s e3f2-r4 @ 4-m1-m e3f2-d1 @ 4-m1-m 4.8 dia 37 42.3 64.9 light indicator 16.4 dia 4 dia 4 m18x1 6g 24 27.7 6.2 optical area 37 42.3 light indicator 4.8 dia 76 16.4 dia m12x1 6g 4 m18x1 6g 24 27.7 6.2 65.5 optical area 37 42.3 49.3 64.9 light indicator sensitivity adjustor 4.8 dia 16.4 dia 4 dia 4 m18x1 6g 24 27.7 6.2 optical area 37 42.3 49.3 light indicator sensitivity adjustor 4.8 dia 16.4 dia m12x1 6g 4 m18x1 6g 76 65.5 24 27.7 6.2 optical area
photoelectric sensors e3f2 19 dc-switching models, metal (brass and stainless steel), radial type ac-switching models, plastic, axial type cable type connector type without potentiometer e3f2-r2r @ 41-m e3f2-r2r @ 41-s e3f2-r2r @ 41-m e3f2-r2r @ 41-m1-s with potentiometer e3f2-ds30 @ 41-m e3f2-ds30 @ 41-s e3f2-ds30 @ 41-m1-m e3f2-ds30 @ 41-m1-s cable type without potentiometer e3f2-3z @ e3f2-r2z @ e3f2-ds10z @ -n 4.8 dia 37 42.3 64.9 light indicator 16.4 dia 4 dia 4 m18x1 6g 24 27.7 6.2 optical area 37 42.3 light indicator 4.8 dia 76 16.4 dia m12x1.6g 4 m18x1.6g 65.5 6.9 24 27.7 3.45 13.2 optical area 37 42.3 49.3 64.9 light indicator sensitivity adjustor 4.8 dia 16.4 dia 4 dia 4 m18x1 6g 6.9 optical area 24 3.45 27.7 13.2 37 42.3 49.3 light indicator sensitivity adjustor 4.8 dia 16.4 dia m12x1 6g 4 m18x1 6g 76 65.5 6.9 optical area 24 13.2 27.7 3.45 16.8 dia. 24 3.1 optical zone 22 90 67.3 62 m18 x 1 6g 5 dia. 8 3.1 light indicator
20 photoelectric sensors e3f2 accessories (order separately) reflectors e39-r1 e39-r1s e39-r3 e39-r7 e39-r8 e39-r40 material, reflective surface: acrylic rear surface: abs 34 40.3 52 59.9 2.7 8 1.6 7.5 7 two, 3.5 dia. 29 4.5 6 r20 3.4 7 18.45 22.9 11 20 0.2 0.2 16 22.5 19.3 34 38 34.8 2-m3 41.8 10.1 1.2 25.4 r25.4 3.4 10? 1.2 2.6 stainless steel (sus304) adhesive tape side two, 3.2 dia. 13.7 14? 3.4 material, reflective surface: acrylic rear surface: abs 4.5 84 7.4 f for m3 for m3 9 100 100 92 92 for m3 8.7 84.5 84.5 77 77 tape reflectors e39-rs3 e39-rsa e39-rsb 80 4-r1 70 0.6 adhesive tape side 35 1 0 0.7 adhesive tape reflecting surface 4 x r1 40 3 5 0.7 adhesive tape reflecting surface 4 x r1
photoelectric sensors e3f2 21 installation mounting bracket y92e-b18 note: hexagon bolt: m5 x 32 material: plastic lens cap e39-f31 mounting bracket y92e-g18 slit (for precision detection with e3f2-10 @ ) e39-es18 20 dia. 4 max. metal rim gasket e3f2 glass plate approx. 35 23.5 20.5 5 30 two tightening nuts 30 m24x1.5 sensor tightening nut 30 30 16 1 21 4
22 photoelectric sensors e3f2 precautions the e3f2 photoelectric sensor is not a safety component for ensur- ing the safety of people which is defined in ec directive (91/368/ eec) and covered by separate european standards or by any other regulations or standards. degree of protection the e3f2 photoelectric sensors have a degree of protection rated with ip67. in this case, the sensors have passed the omron heat shock test before the ip67-test of iec 60529 (submersion at 1m water depth for 30 min). afterwards the sensors have been tested according to the omron waterproof test. heat shock: the alternating, fast temperature changes between -25c and +55c are executed for 5 cycles and 1 hour for each temperature. function and isolation are checked. water proof: the sensors are submerged alternating in water of +2c and +55c. 20 cycles with 1 hour for each tem- perature are executed. function, water tightness and electrical isolation are checked. do not expose the photoelectric sensor to excessive shock during installation, keeping within ip 67 standards. wiring i f the input/output lines of the photoelectric sensor are placed in the same conduit or duct as power lines or high-voltage lines, the photo- electric sensor could be induced to malfunction, or even be damaged by electrical noise. separate the wiring, or use shielded lines as input/output lines to the photoelectric sensor. do not connect the black wire to the brown wire without a load. direct connection of these wires may damage the photoelectric sensor (ac switching type). when using the photoelectric sensor in the vicinity of an inverter motor, ensure to connect the protective earth ground wire of the motor to earth. failure to ground the motor may result in malfunction of the sensor. when you use the photoelectric sensor at temperatures exceeding 45c, the load current must be within the described values as shown in the figure below. installation do not exceed a torque of 2.0 nm (20 kgf cm) when tightening mounting nuts for plastic models 20.0 nm (200 kgf cm) when tightening mounting nuts for metal models black brown blue load sensor 24 to 240 vac operating temperature ( ?c) 200 130 55 45 0 load current (ma)
photoelectric sensors e3f2 23 certain terms and conditions of sale 1. offer; acceptance. these terms and conditions (these "terms ") are deemed part of all catalogs, manuals or other documents, whether electronic or in writ- ing, relating to the sale of goods or services (collectively, the "goods ") by omron electronics llc and its subsidiary companies ("seller "). seller hereby objects to any terms or conditions proposed in buyer's purchase order or other documents which are inconsistent with, or in addition to, these terms. please contact your omron representative to confirm any additional terms for sales from your omron company. 2. prices. all prices stated are current, subject to change without notice by seller. buyer agrees to pay the price in effect at time of shipment. 3. discounts. cash discounts, if any, will apply only on the net amount of invoices sent to buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to seller's payment terms and (ii) buyer has no past due amounts owing to seller. 4. orders. seller will accept no order less than $200 net billing. 5. governmental approvals. buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the impor- tation or sale of the goods. 6. taxes. all taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on seller or required to be collected directly or indirectly by seller for the manufacture, production, sale, delivery, importation, consumption or use of the goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by buyer to seller. 7. financial. if the financial position of buyer at any time becomes unsatisfactory to seller, seller reserves the right to stop shipments or require satisfactory security or payment in advance. if buyer fails to make payment or otherwise comply with these terms or any related agreement, seller may (without liability and in addition to other remedies) cancel any unshipped portion of goods sold hereunder and stop any goods in transit until buyer pays all amounts, includ- ing amounts payable hereunder, whether or not then due, which are owing to it by buyer. buyer shall in any event remain liable for all unpaid accounts. 8. cancellation; etc. orders are not subject to rescheduling or cancellation unless buyer indemnifies seller fully against all costs or expenses arising in connection therewith. 9. force majeure. seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. shipping; delivery. unless otherwise expressly agreed in writing by seller: a. shipments shall be by a carrier selected by seller; b. such carrier shall act as the agent of buyer and delivery to such carrier shall constitute delivery to buyer; c. all sales and shipments of goods shall be fob shipping point (unless oth- erwise stated in writing by seller), at which point title to and all risk of loss of the goods shall pass from seller to buyer, provided that seller shall retain a security interest in the goods until the full purchase price is paid by buyer; d. delivery and shipping dates are estimates only. e. seller will package goods as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. claims. any claim by buyer against seller for shortage or damage to the goods occurring before delivery to the carrier must be presented in writing to seller within 30 days of receipt of shipment and include the original transporta- tion bill signed by the carrier noting that the carrier received the goods from seller in the condition claimed. 12. warranties. (a) exclusive warranty. seller's exclusive warranty is that th e goods will be free from defects in materials and workmanship for a period o f twelve months from the date of sale by seller (or such other period expresse d in writing by seller). seller disclaims all other warranties, express or implied . (b) limitations. seller makes no warranty or representation , express or implied, about non-infringement, merchantabil - ity or fitness for a particular purpose of the goods . buyer acknowledges that it alone has determined that th e goods will suitably meet the requirements of thei r intended use. seller further disclaims all warranties and responsibility o f any type for claims or expenses based on infringement by the goods or other - wise of any intellectual property right. (c) buyer remedy. seller's sole obliga - tion hereunder shall be to replace (in the form originally shipped with buye r responsible for labor charges for removal or replacement thereof) the non - complying good or, at seller's election, to repay or credit buyer an amoun t equal to the purchase price of the good; provided that in no event shall selle r be responsible for warranty, repair, indemnity or any other claims or expense s regarding the goods unless seller's analysis confirms that the goods wer e properly handled, stored, installed and maintained and not subject to contami - nation, abuse, misuse or inappropriate modification. return of any goods b y buyer must be approved in writing by seller before shipment. seller shall no t be liable for the suitability or unsuitability or the results from the use of good s in combination with any electrical or electronic components, circuits, syste m assemblies or any other materials or substances or environments. an y advice, recommendations or information given orally or in writing, are not to b e construed as an amendment or addition to the above warranty. 13. damage limits; etc. seller shall not be liable for special, indi - rect or consequential damages, loss of profits or produc - tion or commercial loss in any way connected with th e goods, whether such claim is based in contract, warrant y, negligence or strict liability. further, in no event shall liability o f seller exceed the individual price of the good on which liability is asserted. 14. indemnities. buyer shall indemnify and hold harmless seller, its affiliates an d its employees from and against all liabilities, losses, claims, costs an d expenses (including attorney's fees and expenses) related to any claim, inves - tigation, litigation or proceeding (whether or not seller is a party) which arise s or is alleged to arise from buyer's acts or omissions under these terms or i n any way with respect to the goods. without limiting the foregoing, buyer (a t its own expense) shall indemnify and hold harmless seller and defend or settl e any action brought against seller to the extent that it is based on a claim tha t any good made to buyer specifications infringed intellectual property rights o f another party. 15. property; confidentiality. the intellectual property embodied in the goods i s the exclusive property of seller and its affiliates and buyer shall not attempt t o duplicate it in any way without the written permission of seller. notwithstand - ing any charges to buyer for engineering or tooling, all engineering and toolin g shall remain the exclusive property of seller. all information and material s supplied by seller to buyer relating to the goods are confidential and propri - etary, and buyer shall limit distribution thereof to its trusted employees an d strictly prevent disclosure to any third party. 16. miscellaneous. (a) waiver. no failure or delay by seller in exercising any righ t and no course of dealing between buyer and seller shall operate as a waive r of rights by seller. (b) assignment. buyer may not assign its rights hereunde r without seller's written consent. (c) amendment. these terms constitute th e entire agreement between buyer and seller relating to the goods, and no pro - vision may be changed or waived unless in writing signed by the parties. (d) severability. if any provision hereof is rendered ineffective or invalid, suc h provision shall not invalidate any other provision. (e) setoff. buyer shall hav e no right to set off any amounts against the amount owing in respect of thi s invoice. (f) as used herein, "including " means "including without limitation". certain precautions on specifications and use 1. suitability of use. seller shall not be responsible for conformity with any stan- dards, codes or regulations which apply to the combination of the good in the buyer's application or use of the good. at buyer's request, seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the good. this information by itself is not sufficient for a complete determination of the suitability of the good in combination with the end product, machine, system, or other application or use. the following are some examples of applications for which particular attention must be given. this is not intended to be an exhaustive list of all possible uses of this good, nor is it intended to imply that the uses listed may be suitable for this good: (i) outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) systems, machines and equipment that could present a risk to life or property. please know and observe all prohibitions of use applicable to this good. never use the product for an application involving serious risk to life or property without ensuring that the system as a whole has been designed to address the risks, and that the seller's product is properly rated and installed for the intended use within the overall equipment or system. 2. programmable products. seller shall not be responsible for the user's pro gramming of a programmable good, or any consequence thereof. 3. performance data. performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warrant y it may represent the result of seller's test conditions, and the user must corr e late it to actual application requirements. actual performance is subject to th e seller's warranty and limitations of liability. 4. change in specifications. product specifications and accessories may b e changed at any time based on improvements and other reasons. it is our pra c tice to change part numbers when published ratings or features are change d or when significant construction changes are made. however, some specific a tions of the good may be changed without any notice. when in doubt, speci a part numbers may be assigned to fix or establish key specifications for you application. please consult with your seller's representative at any time to con firm actual specifications of purchased good. 5. errors and omissions. the information in this catalog has been carefull y checked and is believed to be accurate; however, no responsibility is assume d for clerical, typographical or proofreading errors, or omissions.
24 photoelectric sensors e3f2 omron on-line global - http://www.omron.com usa - http://www.omron.com/oei canada - http://www.omron.ca cat. no. e224-e3-04 printed in usa omron canada, inc. 885 milner avenue toronto, ontario m1b 5v8 416-286-6465 omron electronics llc one commerce drive schaumburg, il 60173 847-843-7900 for us technical support or other inquiries: 800-556-6766 04/05 specifications subject to change without notice complete ?terms and conditions of sale? for product purchase and use are on omron?s website at www.omron.com/oei ? under the ?about us? tab, in the legal matters section. all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.03937. to convert grams into ounces, multiply by 0.03527.

▲Up To Search▲

Price & Availability of E3F2-LS10C4-P1

	To Download E3F2-LS10C4-P1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .